The NanoPi NEO Air is a 40 x 40mm open source ARM board for makers. It uses an Allwinner H3 Quad Core A7 processor at 1.2GHz. Its pins are compatible with the NanoPi NEO (V 1.2) and its 24-pin header is compatible with Raspberry Pi's GPIO pin headers. The NanoPi NEO AIR features 512MB of 16bit wide DDR3 RAM, 8GB eMMC and one MicroSD slot. It has WiFi & Bluetooth and DVP camera interface(YUV422). The DVP camera interface can support friendly arm's 5M-pixel camera module. It has enhanced power circuit design and better heat dissipation.
Picture 1: NanoPi NEO-Air Board layout
Features:
- >> CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2 GHz;
- >> Memory: 512 MB DDR3 RAM;
- >> Storage: 8 GB/32 GB eMMC;
- >> WiFi: 802.11b/g/n;
- >> Bluetooth: 4.0 dual mode;
- >> MicroSD Slot x 1;
- >> MicroUSB: OTG and power input;
- >> DVP Camera interface: 0.5 mm pitch 24-pin FPC seat;
- >> Debug Serial Port: 4Pin, 2.54 mm pitch pin header;
- >> Audio Port: 4Pin, 2.54 mm pitch pin header;
- >> GPIO1: 2.54 mm spacing 24 pin, includes UART, SPI, I2C, GPIO;
- >> GPIO2: 2.54 mm spacing 12 pin, includes USB x2, IR, SPDIF, I2S;
- >> PCB Size: 40 x 40 mm;
- >> PCB layers: 6;
- >> Power Supply: DC 5 V/ 2 A;
- >> Weight: 7.5 g (without Pin-headers); 9.7 g (with Pin-headers);
- >> Working Temperature: -40℃ to 80℃
- >> OS/Software: u-boot, Ubuntu-Core-Xenial, Debian-Jessie;
More info: NanoPi.
No comments:
Post a Comment